容量管理: zones.rs 直读 nginx file_cache 共享内存记账(双轴: 磁盘 + keys_zone 索引内存), ?scan=1 扫盘上限 20 万文件; POST /api/admin/cache/purge 整区清理(只删文件不删目录, 根治 [crit] mkdir failed); POST /api/admin/cache/invalidate 按制品精准失效(预览->确认两步式, glob/子串, 删除上限 5000/扫描上限 20 万); GET /api/admin/cache 新增 capacity 块; 前端容量面板 + 按制品失效工具条; 测试 test-cache-capacity.sh 48/48(容量 27 + 精准失效 21, 含 EXPECT_MIN 护栏与前端静态契约); docs 容量管理章节
Examples
This crate provides a couple of example using ngx crate:
- awssig.rs - An example of NGINX dynamic module that can sign GET request using AWS Signature v4.
- curl - An example of the Access Phase NGINX dynamic module that blocks HTTP requests if
user-agentheader starts withcurl. - httporigdst - A dynamic module recovers the original IP address and port number of the destination packet.
- upstream - A dynamic module demonstrating the setup code to write an upstream filter or load balancer.
To build all these examples simply run:
cargo build --package=examples --examples
CURL
This module demonstrates how to create a minimal dynamic module with http_request_handler, that checks for User-Agent headers and returns status code 403 if UA starts with curl, if a module is disabled then uses core::Status::NGX_DECLINED to indicate the operation is rejected, for example, because it is disabled in the configuration (curl off). Additionally, it demonstrates how to write a defective parser.
An example of nginx configuration file that uses that module can be found at curl.conf.
How to build and run in a Docker container curl example:
# build all dynamic modules examples and specify NGINX version to use
docker buildx build --build-arg NGX_VERSION=1.23.3 -t ngx-rust .
# start NGINX using curl.conf module example:
docker run --rm -d -p 8000:8000 ngx-rust nginx -c examples/curl.conf
# test it - you should see 403 Forbidden
curl http://127.0.0.1:8000 -v -H "user-agent: curl"
# test it - you should see 404 Not Found
curl http://127.0.0.1:8000 -v -H "user-agent: foo"
AWSSIG
This module uses NGX_HTTP_PRECONTENT_PHASE and provides examples, of how to use external dependency and manipulate HTTP headers before sending client requests upstream.
An example of nginx configuration file that uses that module can be found at awssig.conf.
HTTPORIGDST - NGINX Destination IP recovery module for HTTP
This dynamic module recovers the original IP address and port number of the destination packet. It is useful, for example, with container sidecars where all outgoing traffic is redirected to a separate container with iptables before reaching the target.
This module can only be built with the "linux" feature enabled, and will only successfully build on a Linux OS.
Dependencies
This module uses the Rust crate libc and Linux getsockopt socket API.
Example Configuration
HTTP
load_module "modules/libhttporigdst.so";
http {
server {
# use iptables to capture all outgoing traffic and REDIRECT
# to listening port 15501
listen 15501;
# binding variables provided by module will lazily activate it
# and store a context
# variables can be used in config
location / {
# Return if no backend is available or proxy_pass
# return 200 "recv'd: $server_addr:$server_port\n\nproxy_pass http://$server_orig_addr:$server_orig_port\n";
proxy_pass http://$server_orig_addr:$server_orig_port;
}
}
}
Embedded Variables
The following embedded variables are provided:
- server_orig_addr
- Original IP address
- server_orig_port
- Original port
Usage
- Clone the git repository.
git clone [email protected]:nginx/ngx-rust.git
- Compile the module from the cloned repo.
cd ${CLONED_DIRECTORY}/ngx-rust
cargo build --package=examples --example=httporigdst --features=linux
- Copy the shared object to the modules directory, /etc/nginx/modules.
cp ./target/debug/examples/libhttporigdst.so /etc/nginx/modules
- Add the
load_moduledirective to your configuration.
load_module "modules/libhttporigdst.so";
- Reload NGINX.
nginx -t && nginx -s reload
- Redirect traffic outbound.
iptables -t nat -N NGINX_REDIRECT && \
iptables -t nat -A NGINX_REDIRECT -p tcp -j REDIRECT --to-port 15501 --dport 15001 && \
iptables -t nat -N NGINX_OUTPUT && \
iptables -t nat -A OUTPUT -p tcp -j NGINX_OUTPUT && \
iptables -t nat -A NGINX_OUTPUT -j NGINX_REDIRECT
- Redirect traffic inbound.
iptables -t nat -N NGINX_IN_REDIRECT && \
iptables -t nat -A NGINX_IN_REDIRECT -p tcp -j REDIRECT --to-port 15501 --dport 15001 && \
iptables -t nat -N NGINX_INBOUND && \
iptables -t nat -A PREROUTING -p tcp -j NGINX_INBOUND && \
iptables -t nat -A NGINX_INBOUND -p tcp -j NGINX_IN_REDIRECT
- Test with
curl(this step assumes you've uncommented the return directive).
curl --output - ${LISTEN_IP}:15001
recv'd: ${LISTEN_IP}:15501
proxy_pass http://${LISTEN_IP}:15001
Caveats
This module only supports IPv4.
UPSTREAM - Example upstream / load balancing module for HTTP
This module simply proxies requests through a custom load balancer to the previously configured balancer. This is for demonstration purposes only. As a module writer, you can start with this structure and adjust to your needs, then implement the proper algorithm for your usage.
The module replaces the peer callback functions with its own, logs, and then calls through to the originally saved peer functions. This may look confusing at first, but rest assured, it's intentionally not implementing an algorithm of its own.
Attributions
This module was converted from https://github.com/gabihodoroaga/nginx-upstream-module and also highly inspired by the same techniques used in NGINX source: ngx_http_upstream_keepalive_module.c.
Example Configuration
HTTP
load_module "modules/upstream.so"
http {
upstream backend {
server localhost:15501;
custom 32;
}
server {
listen 15500;
server_name _;
location / {
proxy_pass http://backend;
}
}
server {
listen 15501;
location / {
return 418;
}
}
}
Usage
- Clone the git repository.
git clone [email protected]:nginx/ngx-rust.git
- Compile the module from the cloned repo.
cd ${CLONED_DIRECTORY}/ngx-rust
cargo build --package=examples --example=upstream
- Copy the shared object to the modules directory, /etc/nginx/modules.
cp ./target/debug/examples/libupstream.so /etc/nginx/modules
- Add the
load_moduledirective to your configuration.
load_module "modules/libupstream.so";
-
Add the example
serverandupstreamblock from the example above. -
Reload NGINX.
nginx -t && nginx -s reload
- Test with
curl. Traffic should pass to your listener on port 8081 (this could be another NGINX server for example). With debug logging enabled you should notice the upstream log messages (see the source code for log examples, prefixed with "CUSTOM UPSTREAM").