Files
ipass__ipass/tests/gateway/nginx.conf.in
T
admin eae2063bef fix(llm): 探测通道删掉 proxy_set_body 注入体,恢复「探测体原样转发」
面板「测试」报 minimax unknown model 'test' (2013) 的根因:1.0.43 为当时的
空 body 探测兜底,在 conf/nginx.conf 的 /_upstream_test/ 注入了 model=test 的
最小 dummy 体;而 nginx proxy_set_body 是无条件覆盖——把面板发来的「第一个
登记模型」探测体整个换掉,严格校验模型名的厂商一律误报「不通」(健康徽章因
4xx 算存活仍显示正常,二者口径不一致)。测试模板本就无此行,所以本机回归全绿
——典型的 conf/模板漂移,本次连 gateway 模板里同款遗留一并清掉。

- conf/nginx.conf + tests/gateway/nginx.conf.in:删注入行,注释改写成「别加回来」的告诫
- tests/llm/e2e.sh【11】:动态闸(探测体原样到靶机)+ 静态闸(生产 conf 探测块禁 proxy_set_body)
- CLAUDE.md 排障表补一行

llm 264 / gateway 108 全绿
2026-09-17 18:22:31 +08:00

123 lines
4.7 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# ============================================================================
# 域名网关 · 本机回归配置模板(**不是**仓库里的生产配置 conf/nginx.conf)
#
# 由 tests/run.sh 渲染:@MODULE@ / @REPO@ / @RUN@ 三个占位符会替换成绝对路径。
# **不要把这个模板直接交给 nginx**(占位符没替换会 load_module 失败)。
#
# 与生产配置的差异(均因本机 nginx 编译时关闭了 rewrite 模块):
# * 无 set / return / error_page 重定向
# * 端口 18080(转发) / 18081(靶机) / 18082(管理)
# * 状态目录 @RUN@/data —— 独立目录,**绝不碰生产 data/**
# ============================================================================
load_module @MODULE@;
worker_processes 2;
error_log @RUN@/logs/error.log info;
pid @RUN@/logs/nginx.pid;
events {
worker_connections 1024;
}
http {
default_type application/json;
log_format main '$remote_addr "$request" $status backend=$proxy_backend_addr';
access_log @RUN@/logs/access.log main;
sendfile on;
keepalive_timeout 65;
ipass_state state 10m;
ipass_data_dir @RUN@/data;
# ---- 靶机:模拟内网后端(e2e 断言返回体里的 "from":"backend")----
server {
listen 18081;
server_name _;
root @REPO@/tests/gateway/backend;
location / { }
}
# ---- 转发 server ----
server {
listen 18080;
# 本机 nginx 未编 PCRE,不能用正则 server_name。
# 无妨:模块自己从 Host 头解析子域名,不依赖 nginx 的捕获变量。
server_name _;
location / {
ipass_proxy on;
proxy_pass http://$proxy_backend_addr;
proxy_http_version 1.1;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_connect_timeout 5s;
proxy_read_timeout 300s;
}
}
# ---- 管理 server ----
server {
listen 18082;
server_name proxy-api.yourdomain.com localhost;
client_max_body_size 2m;
# 必须大于最大 API 请求体,否则 body 落临时文件 → 模块读不到(表现为「参数缺失」)
client_body_buffer_size 1m;
# 与生产 conf 同构:路由器反代场景下保持 Location 相对路径
absolute_redirect off;
port_in_redirect off;
# 与生产 conf 同构:/admin 进总览页,/admin/ 下是其余页面与静态资源
#
# **不发版不重启也能修好缓存**:所有 HTML / CSS / JS 都加
# `Cache-Control: no-store`(expires -1 + add_header),让浏览器
# 每次发版后必重新拉。文件本身都不大(HTML<5KB,CSS<10KB,JS<15KB),
# 无缓存的性能影响可忽略。不加的话:**用户浏览器会一直用发版前的
# 旧 JS**,管理台表单看不到新字段就是典型表现。
location = /admin {
default_type text/html;
alias @REPO@/www/overview.html;
expires -1;
add_header Cache-Control "no-store" always;
}
# `/admin/`(末尾斜杠、后面无字符)→ nginx 把请求 URI 拼到 alias 后
# 变成「打开 alias 文件/目录」,实测 alias 后空 URI + index 拼出
# `overview.htmlindex.html`(错误 500)。**最干净**:内部重定向到
# `/admin/overview.html`,重新走 location 匹配(落到 `= /admin` 那条)。
location = /admin/ {
rewrite ^ /admin/overview.html last;
}
location /admin/ {
alias @REPO@/www/;
expires -1;
add_header Cache-Control "no-store" always;
}
location /api/ {
ipass_api on;
}
# 上游连通性测试:/api/admin/upstreams/test 内部重定向到这里
# (与生产 conf 同套:proxy_pass 复用 $llm_*,探测体原样转发,状态透传)
location /_upstream_test/ {
internal;
proxy_pass $llm_target;
proxy_http_version 1.1;
proxy_pass_request_headers off;
proxy_set_header Host $llm_host;
proxy_set_header Authorization $llm_auth;
proxy_set_header Content-Type $http_content_type;
proxy_set_header Accept $http_accept;
# 探测体由管理台原样发来(含登记模型),不注入任何覆盖体——
# 见 conf/nginx.conf 同 location 的告诫注释与 llm e2e【11】静态闸。
proxy_connect_timeout 5s;
proxy_send_timeout 15s;
proxy_read_timeout 15s;
}
}
}