Files
sso/deploy/Dockerfile.base
T
admin 67a8e731cc feat(deploy): 容器化构建(多阶段 Dockerfile + compose + entrypoint + 共用 base)
- 主镜像 Dockerfile:多阶段构建,复用 rust-nginx-base 镜像(nginx 1.30.4 + rust 1.89
  + 已 configure 的 pcre/openssl/编译链),冷构建从 ~17min 压到 ~5min
- deploy/nginx.conf:容器内 nginx 配置(端口 18098 / /usr/local/nginx/... 路径)
- docker-compose.yml:本机一键起服务(端口 8881→18098)+ S10 健康探测
- scripts/container-entrypoint.sh:容器入口脚本(启动前 healthcheck 等)
- .dockerignore:避免把 build/target/data/refs 误打进镜像
- deploy/Dockerfile.base:rust-nginx-base 镜像定义(apt 链 + nginx/pcre 源码 + 已
  ./configure 过的源码树)
- deploy/build-base-image.sh:构建并推送 base 镜像到阿里云 CR
  (crpi-yscq976uwza88qap.cn-shenzhen.personal.cr.aliyuncs.com/ssw188/nginx)
2026-09-24 16:27:05 +08:00

110 lines
5.0 KiB
Docker
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# ============================================================================
# rust-nginx-base —— iPass / SSO / 任何 ngx-rust 项目共用的编译基础镜像
#
# 包含:
# - rust:1.89-slim-bookworm(rust 工具链)
# - nginx 编译链:build-essential / libpcre2-dev / zlib1g-dev / libssl-dev
# - bindgen 依赖:clang / libclang-dev / pkg-config
# - 已下载 + ./configure 过的 nginx 1.30.4 源码树(/src/nginx-1.30.4/)
# objs/ 含 bindgen 所需头文件
# - 已 configure 过的 pcre 8.45 源码树(/src/pcre-8.45/)
#
# 设计:
# - tag 版本号:1.30.4-rust-1.89(nginx 与 rust 任一升级都推新 tag)
# - 推到阿里云 CR:crpi-yscq976uwza88qap.cn-shenzhen.personal.cr.aliyuncs.com/ssw188/nginx
# - 复用方式:FROM crpi-.../nginx:1.30.4-rust-1.89 AS builder → 直接 cargo build
#
# 构建命令:
# docker build \
# --build-context ngxbuild=../ipass/build/ngxbuild \
# -f deploy/Dockerfile.base \
# -t crpi-yscq976uwza88qap.cn-shenzhen.personal.cr.aliyuncs.com/ssw188/nginx:1.30.4-rust-1.89 \
# .
#
# ============================================================================
# syntax=docker/dockerfile:1.7
ARG NGINX_VERSION=1.30.4
ARG PCRE_VERSION=8.45
ARG RUST_VERSION=1.89
FROM rust:${RUST_VERSION}-slim-bookworm
ARG NGINX_VERSION
ARG PCRE_VERSION
# nginx 编译链 + bindgen 依赖 + 下载工具(兜底用)
RUN apt-get update && apt-get install -y --no-install-recommends \
build-essential \
libpcre2-dev \
zlib1g-dev \
libssl-dev \
clang \
libclang-dev \
pkg-config \
curl \
ca-certificates \
xz-utils \
git \
&& rm -rf /var/lib/apt/lists/*
# --- nginx + pcre 源码:从 ngxbuild 上下文拷入 ---
# 约定:ngxbuild 上下文必须含 nginx-${NGINX_VERSION}.tar.gz 和 pcre-${PCRE_VERSION}.tar.gz
# 升级 nginx 版本时(NGINX_VERSION=1.30.5 等):
# 先 curl 到 ngxbuild 目录:
# curl -fsSL https://nginx.org/download/nginx-1.30.5.tar.gz -o ../ipass/build/ngxbuild/nginx-1.30.5.tar.gz
# curl -fsSL https://sourceforge.net/projects/pcre/files/pcre/8.45/pcre-8.45.tar.gz/download -o ../ipass/build/ngxbuild/pcre-8.45.tar.gz
WORKDIR /src
COPY --from=ngxbuild nginx-${NGINX_VERSION}.tar.gz /tmp/nginx-${NGINX_VERSION}.tar.gz
COPY --from=ngxbuild pcre-${PCRE_VERSION}.tar.gz /tmp/pcre-${PCRE_VERSION}.tar.gz
RUN tar -xzf /tmp/nginx-${NGINX_VERSION}.tar.gz -C /src/ \
&& tar -xzf /tmp/pcre-${PCRE_VERSION}.tar.gz -C /src/ \
&& rm -f /tmp/nginx-${NGINX_VERSION}.tar.gz /tmp/pcre-${PCRE_VERSION}.tar.gz
# --- nginx + pcre:configure + 触发 pcre 子构建(生成 pcre.h),但不编 nginx 二进制 ----
# 为什么必须 make 一次:
# 1. ./configure 生成 objs/Makefile + ngx_auto_config.h(bindgen 头文件)
# 2. nginx 的 objs/Makefile 依赖 pcre.h(pcre-8.45/pcre.h)—— **不跑 make 就没 pcre.h**
# 3. cargo nginx-sys build.rs 直接读 pcre.h + ngx_*.h,缺一个就 fatal error
# 4. nginx make 的第一步是触发 pcre 子目录的 configure,生成 pcre.h
# 5. 但 nginx make 后续会真编 nginx 二进制(耗时)。这里只跑 make 的 pcre 子步骤:
# `make objs/Makefile` 触发 pcre 子 configure,但不全量编译
# 等等——实测 nginx 1.30.4 的 objs/Makefile 不会因单纯 touch objs/Makefile 触发 pcre 子构建。
# 必须实际跑 `make`(包括 nginx 二进制)。代价:base 多 30s,但下游 make 是纯增量(秒过)。
WORKDIR /src/nginx-${NGINX_VERSION}
RUN ./configure \
--prefix=/usr/local/nginx \
--with-pcre=/src/pcre-${PCRE_VERSION} \
--with-http_realip_module \
--with-http_ssl_module \
--without-http_ssi_module \
--without-http_userid_module \
--without-http_autoindex_module \
--without-http_geo_module \
--without-http_split_clients_module \
--without-http_referer_module \
--without-http_uwsgi_module \
--without-http_scgi_module \
--without-http_grpc_module \
&& make -j"$(nproc)" 2>&1 | tail -5 \
&& test -f /src/pcre-${PCRE_VERSION}/pcre.h \
&& test -f /src/nginx-${NGINX_VERSION}/objs/ngx_auto_config.h \
&& test -x /src/nginx-${NGINX_VERSION}/objs/nginx
# --- 默认环境变量:让 FROM 此镜像的项目可以直接 cargo build ----
# 使用镜像的项目 cargo build 前不必再设这两个变量
ENV NGINX_SOURCE_DIR=/src/nginx-${NGINX_VERSION}
ENV NGINX_BUILD_DIR=/src/nginx-${NGINX_VERSION}/objs
ENV DEBIAN_FRONTEND=noninteractive
# 标记镜像元数据(其他项目 FROM 时可看到 base 来源)
ARG BASE_VERSION="nginx-${NGINX_VERSION}-rust-${RUST_VERSION}"
LABEL org.opencontainers.image.title="rust-nginx-base" \
org.opencontainers.image.description="ngx-rust 项目共用编译基础:rust 1.89 + 已 configure 的 nginx 1.30.4 + pcre 8.45" \
org.opencontainers.image.source="http://192.168.1.18:13300/ipass/sso" \
org.opencontainers.image.version="${BASE_VERSION}"
WORKDIR /build
CMD ["/bin/bash"]