chore(baseline): 先入库既有本地未提交改动(tdc-connector 直连形态)
G12 收口前的基线留痕:connector-engine.ts 与 engine-registry.ts 的改动 在本轮接手时已是工作区未提交状态(非本轮新写)。按项目约定 「不覆盖、不无视」,先提交入库再在其上做正路收口,便于逐行对比。
This commit is contained in:
1 parent
4ef575005b
commit
f44dd57af9
3 files changed
+388
-2
No files matched your search
@@ -0,0 +1,51 @@
|
|||||||
|
# 2026-11-14
|
||||||
|
|
||||||
|
## ★ 09:28 复查 192.168.1.7:SSH 正常,上次修复有效
|
||||||
|
|
||||||
|
用户问「是不是又 ssh 不上了」。**结论:能连,一切正常,没有复发。**
|
||||||
|
|
||||||
|
### 健康证据
|
||||||
|
|
||||||
|
| 检查项 | 结果 |
|
||||||
|
|---|---|
|
||||||
|
| SSH 登录 | ✅ 通(`tee_amd_7_user`)。裸探时的 `Invalid user xs` / `kex_...closed` 是我没给凭据造成的,非故障 |
|
||||||
|
| 连续运行 | **up 3 days 16:16**,boot 0 = `11-10 17:12:26` 至今**从未重启** |
|
||||||
|
| sshd | `NRestarts=0`,`ActiveEnterTimestamp=11-10 17:12:28` |
|
||||||
|
| 日志连续性 | 11-14 每小时 715~743 行,**零断层**(对比 11-10 那次 13:54–17:12 共 0 行) |
|
||||||
|
| 失败服务 | **0 个** |
|
||||||
|
| host-agent | `inactive` + `disabled` + **`NRestarts=0`** ⇒ 停用 3 天半,一次没起来 |
|
||||||
|
| 负载/磁盘/内存 | `0.40 0.54 0.58` / 38% (168G/466G) / 46G 中用 6.4G |
|
||||||
|
| known_hosts | 本机已更新为 `SHA256:IIb4ATvW…`,与服务端**一致** |
|
||||||
|
| 端口 | 22 OPEN、3010 OPEN、13300/3020 closed(后者属正常,见下) |
|
||||||
|
|
||||||
|
### ★ 顺带纠正一条过期记忆:控制面不在 1.7
|
||||||
|
|
||||||
|
hostd 实际启动参数(`pgrep -a mpc-host` 实读):
|
||||||
|
|
||||||
|
```
|
||||||
|
mpc-host hostd --listen 0.0.0.0:3010 --allow-remote \
|
||||||
|
--shared-secret <hex> \
|
||||||
|
--control-plane 192.168.1.23:3020 \ ← 控制面在 1.23,不是本机
|
||||||
|
--node-platform snp --node-site alice \
|
||||||
|
--node-host 192.168.1.7 --node-tcb 5 \
|
||||||
|
--node-qemu /opt/kata/bin/qemu-system-x86_64 \
|
||||||
|
--node-firmware /opt/kata/share/ovmf/AMDSEV.fd \
|
||||||
|
--node-kernel /opt/kata/share/kata-containers/vmlinuz-6.12.36-160-confidential \
|
||||||
|
--node-initrd /tmp/mpc-tee-run-attestpair/initrd.img \
|
||||||
|
--node-measurement 238f2deb… --node-kbc online \
|
||||||
|
--node-kbs-endpoint http://10.93.0.1:18093 \
|
||||||
|
--node-capacity 2 --report-interval 5 --guest-endpoint 10.93.0.1:3010
|
||||||
|
```
|
||||||
|
|
||||||
|
- **3010 返回 401 是正常的**:需要 Bearer 共享密钥,不是故障。
|
||||||
|
- **3020 在 1.7 上不开也是正常的**:控制面在 `192.168.1.23`。
|
||||||
|
旧记忆「AMD 真机 1.7 兼控制面 3020」**已过期,勿再按此排查**。
|
||||||
|
- KBS 也在跑:`serve.py --host 10.93.0.1 --port 18093 --platform snp --verifier snp-verify-attestation.sh`
|
||||||
|
|
||||||
|
### 结论
|
||||||
|
|
||||||
|
上次「停掉 host-agent 无限重启」的处置**确实解决了根因**:3 天半无重启、无日志断层、无 failed 服务。
|
||||||
|
|
||||||
|
但 `/dev/vfio/61` + `vfio-pci` 未加载的**底层问题仍未修**,只是把服务禁用绕过了。
|
||||||
|
若要恢复 PCIe 隧道功能,必须先修根因(`modprobe vfio-pci` + 把硬编码的 group 61 改成真实的 group 60)再启用,
|
||||||
|
否则会原样复发(`Restart=always` + `StartLimitIntervalSec=0` 的组合会让它崩到拖垮系统)。
|
||||||
@@ -0,0 +1,314 @@
|
|||||||
|
/**
|
||||||
|
* tdc-rs 连接器执行引擎 —— 平台**不直接起 mpc 进程**,而是把算子派发到各参与方的
|
||||||
|
* `tdc-connector`(Rust 版连接器),由连接器在本机点火。这是「全量真编排」的形态:
|
||||||
|
* 平台只做编排/取数/落库,密态计算发生在三方设备各自的连接器里。
|
||||||
|
*
|
||||||
|
* ## 契约来源(逐字对齐,不是推测)
|
||||||
|
* - `tdc-rs/src/tdc/controller/exec.rs`
|
||||||
|
* `POST /api/ssw/tdc/DeliveryTask/{id}/Exec/Start` → `{code:200,data:{ok,accepted,duplicate,execId,phase,statusPath}}`
|
||||||
|
* `GET /api/ssw/tdc/DeliveryTask/{id}/Exec/Status?execId=…` → `{code:200,data:{records:[ExecRecord]}}`
|
||||||
|
* 头:`X-Internal-Token: <SSW_INTERNAL_TOKEN>` + `X-Protocol-Version: 3.2`
|
||||||
|
* - `tdc-rs/src/tdc/engine/mod.rs::run` payload:
|
||||||
|
* `selfParty` + `clusterConfig.nax.{parties,vnetName,vnetSecret,namespace,rayHead}` + 可选 `algorithmHash`
|
||||||
|
* - `tdc-rs/src/tdc/engine/state.rs` phase 取值:
|
||||||
|
* `ACCEPTED | CHECKING | CONTROL_PLANE | NETWORK | RAY | MPC | SUCCEEDED | PLANNED | FAILED`
|
||||||
|
* 终态只有三个:`SUCCEEDED` / `FAILED` / `PLANNED`(**PLANNED 是 dry-run,不算成功**)。
|
||||||
|
*
|
||||||
|
* ## 三条硬约束(踩过就别再踩)
|
||||||
|
* 1. `Exec/Start` 只是**受理**("受理 ≠ 执行成功"),必须轮询 `Exec/Status` 拿终态;
|
||||||
|
* 直接当成功会把「点火失败」写成「计算完成」。
|
||||||
|
* 2. 状态是**按 execId 幂等**的:`namespace + vnetName + taskId` 相同会复用旧记录(
|
||||||
|
* `accept()` 只在 FAILED/PLANNED 时重开)。所以 vnetName/taskId 必须按 runId+stepId 派生,
|
||||||
|
* 否则重跑一次会拿到上一轮的终态、误判为「已完成」。
|
||||||
|
* 3. mpc 点火有**启动顺序约束**(deploy 侧注释:编号大的先起,且需确认对端 LISTEN ≥6s)。
|
||||||
|
* 这里按 parties 逆序 + 可配间隔下发,别一次性并发打满。
|
||||||
|
*/
|
||||||
|
import * as http from 'http';
|
||||||
|
import * as https from 'https';
|
||||||
|
import { URL } from 'url';
|
||||||
|
import { createHash } from 'crypto';
|
||||||
|
import { ComputeEngine, StepArtifact, StepContext, StepResult, failed, success } from './compute-engine';
|
||||||
|
|
||||||
|
/** 单方连接器地址。 */
|
||||||
|
export interface ConnectorTarget {
|
||||||
|
party: string;
|
||||||
|
base: string;
|
||||||
|
}
|
||||||
|
|
||||||
|
export interface ConnectorSettings {
|
||||||
|
/** 是否启用(TDC_CONNECTORS 配了合法映射才算启用) */
|
||||||
|
enabled: boolean;
|
||||||
|
targets: ConnectorTarget[];
|
||||||
|
token: string;
|
||||||
|
protocolVersion: string;
|
||||||
|
namespace: string;
|
||||||
|
/** 固定 vnet 名/密钥(不配则按 runId+stepId 派生;配了便于跨轮复用同一 overlay) */
|
||||||
|
vnetName: string;
|
||||||
|
vnetSecret: string;
|
||||||
|
/** 单次 HTTP 超时 */
|
||||||
|
requestTimeoutMs: number;
|
||||||
|
/** 等终态的总预算 */
|
||||||
|
dispatchTimeoutMs: number;
|
||||||
|
pollIntervalMs: number;
|
||||||
|
/** 相邻两方下发间隔(满足「编号大的先起」) */
|
||||||
|
spawnGapMs: number;
|
||||||
|
rayHead: string;
|
||||||
|
raw: string;
|
||||||
|
}
|
||||||
|
|
||||||
|
/** 本引擎接管的算子:目前 tdc-rs 的 `ensure_mpc` 只拼了 PSI 参数(LR 仍是半成品,见 mod.rs:591)。 */
|
||||||
|
const SUPPORTED_OPERATORS = new Set(['prep.intersect']);
|
||||||
|
|
||||||
|
/** 判定终态(`PLANNED` 是 dry-run,按失败处理,绝不冒充成功)。 */
|
||||||
|
const TERMINAL_PHASES = new Set(['SUCCEEDED', 'FAILED', 'PLANNED']);
|
||||||
|
|
||||||
|
export function connectorSettings(): ConnectorSettings {
|
||||||
|
const raw = (process.env.TDC_CONNECTORS || '').trim();
|
||||||
|
const targets: ConnectorTarget[] = [];
|
||||||
|
for (const seg of raw.split(',')) {
|
||||||
|
const s = seg.trim();
|
||||||
|
if (!s) continue;
|
||||||
|
const i = s.indexOf('=');
|
||||||
|
if (i <= 0) continue;
|
||||||
|
const party = s.slice(0, i).trim();
|
||||||
|
const base = s.slice(i + 1).trim().replace(/\/+$/, '');
|
||||||
|
if (party && /^https?:\/\//.test(base)) targets.push({ party, base });
|
||||||
|
}
|
||||||
|
return {
|
||||||
|
enabled: targets.length > 0,
|
||||||
|
targets,
|
||||||
|
// 连接器侧的入向凭证就是平台内部令牌(`guard()` 与中间件同口径)
|
||||||
|
token: process.env.TDC_INTERNAL_TOKEN || process.env.SSW_INTERNAL_TOKEN || '',
|
||||||
|
protocolVersion: process.env.TDC_PROTOCOL_VERSION || '3.2',
|
||||||
|
namespace: process.env.TDC_NAMESPACE || 'ssw-flow',
|
||||||
|
vnetName: process.env.TDC_VNET_NAME || '',
|
||||||
|
vnetSecret: process.env.TDC_VNET_SECRET || '',
|
||||||
|
requestTimeoutMs: Number(process.env.TDC_REQUEST_TIMEOUT_MS || 15000),
|
||||||
|
dispatchTimeoutMs: Number(process.env.TDC_DISPATCH_TIMEOUT_MS || 180000),
|
||||||
|
pollIntervalMs: Number(process.env.TDC_POLL_INTERVAL_MS || 2000),
|
||||||
|
spawnGapMs: Number(process.env.TDC_SPAWN_GAP_MS || 3000),
|
||||||
|
rayHead: process.env.TDC_RAY_HEAD || '',
|
||||||
|
raw,
|
||||||
|
};
|
||||||
|
}
|
||||||
|
|
||||||
|
interface HttpResult {
|
||||||
|
status: number;
|
||||||
|
body: string;
|
||||||
|
}
|
||||||
|
|
||||||
|
/** 最小 HTTP 客户端(不引三方库;与 mpc-client.ts 一样走 node 原生模块)。 */
|
||||||
|
function requestJson(url: string, method: string, headers: Record<string, string>, body: any, timeoutMs: number): Promise<HttpResult> {
|
||||||
|
return new Promise((resolve, reject) => {
|
||||||
|
let u: URL;
|
||||||
|
try {
|
||||||
|
u = new URL(url);
|
||||||
|
} catch (e: any) {
|
||||||
|
reject(new Error(`URL 非法: ${url}`));
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
const payload = body === undefined ? null : Buffer.from(JSON.stringify(body), 'utf8');
|
||||||
|
const h: Record<string, string> = { ...headers };
|
||||||
|
if (payload) {
|
||||||
|
h['Content-Type'] = 'application/json';
|
||||||
|
h['Content-Length'] = String(payload.length);
|
||||||
|
}
|
||||||
|
const mod = u.protocol === 'https:' ? https : http;
|
||||||
|
const req = mod.request(
|
||||||
|
{
|
||||||
|
protocol: u.protocol,
|
||||||
|
hostname: u.hostname,
|
||||||
|
port: u.port || (u.protocol === 'https:' ? 443 : 80),
|
||||||
|
path: `${u.pathname}${u.search}`,
|
||||||
|
method,
|
||||||
|
headers: h,
|
||||||
|
},
|
||||||
|
(res) => {
|
||||||
|
const chunks: Buffer[] = [];
|
||||||
|
res.on('data', (c) => chunks.push(c as Buffer));
|
||||||
|
res.on('end', () => resolve({ status: res.statusCode || 0, body: Buffer.concat(chunks).toString('utf8') }));
|
||||||
|
},
|
||||||
|
);
|
||||||
|
req.setTimeout(timeoutMs, () => req.destroy(new Error(`请求超时 ${timeoutMs}ms`)));
|
||||||
|
req.on('error', reject);
|
||||||
|
if (payload) req.write(payload);
|
||||||
|
req.end();
|
||||||
|
});
|
||||||
|
}
|
||||||
|
|
||||||
|
/** 连接器统一信封:`{code,msg,data}`(`ActionResult`),失败也可能是 HTTP 200 + code!=200。 */
|
||||||
|
function unwrap(r: HttpResult): { ok: boolean; data: any; error?: string } {
|
||||||
|
let parsed: any = null;
|
||||||
|
try {
|
||||||
|
parsed = r.body ? JSON.parse(r.body) : null;
|
||||||
|
} catch {
|
||||||
|
return { ok: false, data: null, error: `响应不是 JSON(HTTP ${r.status}):${r.body.slice(0, 200)}` };
|
||||||
|
}
|
||||||
|
if (r.status === 401) return { ok: false, data: parsed, error: '连接器拒绝:内部令牌或协议版本不匹配(401)' };
|
||||||
|
if (r.status < 200 || r.status >= 300) {
|
||||||
|
return { ok: false, data: parsed, error: `HTTP ${r.status}:${(parsed && (parsed.msg || parsed.error)) || r.body.slice(0, 200)}` };
|
||||||
|
}
|
||||||
|
const code = parsed && typeof parsed.code === 'number' ? parsed.code : 200;
|
||||||
|
if (code !== 200) return { ok: false, data: parsed && parsed.data, error: (parsed && parsed.msg) || `连接器返回 code=${code}` };
|
||||||
|
return { ok: true, data: parsed ? parsed.data : null };
|
||||||
|
}
|
||||||
|
|
||||||
|
/** taskId 只允许安全字符(它会参与幂等键与落盘文件名)。 */
|
||||||
|
function safeId(s: string): string {
|
||||||
|
return (s || '').replace(/[^A-Za-z0-9_-]/g, '_').slice(0, 96) || 'task';
|
||||||
|
}
|
||||||
|
|
||||||
|
export class ConnectorEngine implements ComputeEngine {
|
||||||
|
readonly name = 'tdc-connector';
|
||||||
|
private readonly settings: ConnectorSettings;
|
||||||
|
|
||||||
|
constructor(settings = connectorSettings()) {
|
||||||
|
this.settings = settings;
|
||||||
|
}
|
||||||
|
|
||||||
|
supports(engineType: string, operatorKey: string): boolean {
|
||||||
|
return engineType === 'mpc' && SUPPORTED_OPERATORS.has(operatorKey);
|
||||||
|
}
|
||||||
|
|
||||||
|
async execute(ctx: StepContext): Promise<StepResult> {
|
||||||
|
const s = this.settings;
|
||||||
|
const logs: string[] = [];
|
||||||
|
// 参与方优先级:节点参数 params.parties(流程里显式指定) > StepContext.parties(项目/数据集归属)
|
||||||
|
// > TDC_CONNECTORS 全量。★ 允许节点覆盖是必要的:同一套部署既要跑三方,也要能在某台设备
|
||||||
|
// 掉线时按两方复算,否则一个端点不可达就整图失败。
|
||||||
|
const explicit = Array.isArray(ctx.params?.parties) ? ctx.params!.parties.map(String) : [];
|
||||||
|
const parties = explicit.length ? explicit : ctx.parties?.length ? ctx.parties : s.targets.map((t) => t.party);
|
||||||
|
const targets = parties.map((p) => s.targets.find((t) => t.party === p)).filter((t): t is ConnectorTarget => !!t);
|
||||||
|
|
||||||
|
if (targets.length !== parties.length) {
|
||||||
|
const missing = parties.filter((p) => !s.targets.some((t) => t.party === p));
|
||||||
|
return failed(this.name, `参与方缺少连接器端点:${missing.join(',')}(TDC_CONNECTORS 只配了 ${s.targets.map((t) => t.party).join(',')})`, logs);
|
||||||
|
}
|
||||||
|
if (!s.token) {
|
||||||
|
return failed(this.name, '缺少内部令牌:TDC_INTERNAL_TOKEN / SSW_INTERNAL_TOKEN 均未配置,连接器会 401', logs);
|
||||||
|
}
|
||||||
|
|
||||||
|
// ★ 幂等键:同一 run+step 重跑必须落到同一条 exec 记录(否则会重复点火三方进程)。
|
||||||
|
const taskId = safeId(`${ctx.runId}-${ctx.stepId}`);
|
||||||
|
const vnetName = s.vnetName || `vnet-${taskId}`;
|
||||||
|
// ★ 密钥必须**跨方一致**且**跨轮稳定**(重跑要能复用同一 overlay 配置),
|
||||||
|
// 所以按 taskId 做确定性派生,而不是每轮 randomBytes。
|
||||||
|
const vnetSecret = s.vnetSecret || createHash('sha256').update(`ssw-flow|${taskId}`).digest('hex').slice(0, 32);
|
||||||
|
const headers = {
|
||||||
|
'X-Internal-Token': s.token,
|
||||||
|
'X-Protocol-Version': s.protocolVersion,
|
||||||
|
};
|
||||||
|
|
||||||
|
logs.push(`[tdc-connector] 算子 ${ctx.operatorKey} taskId=${taskId} vnet=${vnetName} parties=${parties.join(',')}`);
|
||||||
|
|
||||||
|
// ---- ① 按逆序逐个受理(满足 mpc「编号大的先起」)----
|
||||||
|
const started: { party: string; base: string; execId: string; phase: string }[] = [];
|
||||||
|
for (let i = targets.length - 1; i >= 0; i--) {
|
||||||
|
const t = targets[i];
|
||||||
|
const payload = {
|
||||||
|
selfParty: t.party,
|
||||||
|
...(ctx.params?.algorithmHash ? { algorithmHash: String(ctx.params.algorithmHash) } : {}),
|
||||||
|
clusterConfig: {
|
||||||
|
nax: {
|
||||||
|
namespace: s.namespace,
|
||||||
|
vnetName,
|
||||||
|
vnetSecret,
|
||||||
|
parties,
|
||||||
|
rayHead: s.rayHead,
|
||||||
|
rayHeadName: s.rayHead ? s.rayHead.split(':')[0] : '',
|
||||||
|
consumerParty: parties[0],
|
||||||
|
},
|
||||||
|
},
|
||||||
|
};
|
||||||
|
const url = `${t.base}/api/ssw/tdc/DeliveryTask/${encodeURIComponent(taskId)}/Exec/Start`;
|
||||||
|
let r: HttpResult;
|
||||||
|
try {
|
||||||
|
r = await requestJson(url, 'POST', headers, payload, s.requestTimeoutMs);
|
||||||
|
} catch (e: any) {
|
||||||
|
return failed(this.name, `派发到 ${t.party} 失败:${e.message}`, [...logs, `[ERROR] POST ${url} → ${e.message}`]);
|
||||||
|
}
|
||||||
|
const u = unwrap(r);
|
||||||
|
if (!u.ok || !u.data?.execId) {
|
||||||
|
return failed(this.name, `${t.party} 未受理:${u.error}`, [...logs, `[ERROR] POST ${url} → HTTP ${r.status} ${r.body.slice(0, 300)}`]);
|
||||||
|
}
|
||||||
|
started.push({ party: t.party, base: t.base, execId: u.data.execId, phase: u.data.phase || 'ACCEPTED' });
|
||||||
|
logs.push(`[tdc-connector] ${t.party} 已受理 execId=${u.data.execId} phase=${u.data.phase}${u.data.duplicate ? '(幂等复用旧记录)' : ''}`);
|
||||||
|
if (i > 0 && s.spawnGapMs > 0) await sleep(s.spawnGapMs);
|
||||||
|
}
|
||||||
|
|
||||||
|
// ---- ② 轮询终态 ----
|
||||||
|
const deadline = Date.now() + s.dispatchTimeoutMs;
|
||||||
|
const final = new Map<string, any>();
|
||||||
|
while (Date.now() < deadline) {
|
||||||
|
let pending = 0;
|
||||||
|
for (const st of started) {
|
||||||
|
if (final.has(st.party)) continue;
|
||||||
|
const url = `${st.base}/api/ssw/tdc/DeliveryTask/${encodeURIComponent(taskId)}/Exec/Status?execId=${encodeURIComponent(st.execId)}`;
|
||||||
|
try {
|
||||||
|
const r = await requestJson(url, 'GET', headers, undefined, s.requestTimeoutMs);
|
||||||
|
const u = unwrap(r);
|
||||||
|
const rec = u.ok ? (u.data?.records || []).find((x: any) => x.exec_id === st.execId) || u.data?.records?.[0] : null;
|
||||||
|
if (rec && TERMINAL_PHASES.has(String(rec.phase))) {
|
||||||
|
final.set(st.party, rec);
|
||||||
|
logs.push(`[tdc-connector] ${st.party} 终态 ${rec.phase}${rec.message ? `:${truncate(rec.message, 200)}` : ''}`);
|
||||||
|
} else {
|
||||||
|
pending++;
|
||||||
|
if (rec) st.phase = String(rec.phase);
|
||||||
|
}
|
||||||
|
} catch (e: any) {
|
||||||
|
pending++;
|
||||||
|
logs.push(`[WARN] 查 ${st.party} 状态失败(将继续重试):${e.message}`);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (final.size === started.length) break;
|
||||||
|
if (pending === 0) break;
|
||||||
|
await sleep(s.pollIntervalMs);
|
||||||
|
}
|
||||||
|
|
||||||
|
// ---- ③ 收口:任一方非 SUCCEEDED 即整体失败 ----
|
||||||
|
const missing = started.filter((x) => !final.has(x.party));
|
||||||
|
if (missing.length) {
|
||||||
|
const detail = missing.map((x) => `${x.party}=${x.phase}`).join(',');
|
||||||
|
return failed(
|
||||||
|
this.name,
|
||||||
|
`等待终态超时(${s.dispatchTimeoutMs}ms):${detail}。注意 mpc 点火只拉起进程,算子是否出结果需看各方日志`,
|
||||||
|
logs,
|
||||||
|
);
|
||||||
|
}
|
||||||
|
const bad = [...final.entries()].filter(([, rec]) => rec.phase !== 'SUCCEEDED');
|
||||||
|
if (bad.length) {
|
||||||
|
const detail = bad.map(([p, rec]) => `${p}: ${rec.phase} — ${truncate(rec.message || '', 200)}`).join(' | ');
|
||||||
|
return failed(this.name, `连接器执行未成功:${detail}`, logs);
|
||||||
|
}
|
||||||
|
|
||||||
|
const artifacts: StepArtifact[] = started.map((x) => {
|
||||||
|
const rec = final.get(x.party) || {};
|
||||||
|
return {
|
||||||
|
portKey: 'report',
|
||||||
|
type: 'report' as const,
|
||||||
|
title: `${ctx.label} · ${x.party} 连接器执行轨迹`,
|
||||||
|
summary: `tdc-connector ${x.phase}(execId=${x.execId})`,
|
||||||
|
metrics: {
|
||||||
|
party: x.party,
|
||||||
|
endpoint: x.base,
|
||||||
|
execId: x.execId,
|
||||||
|
phase: rec.phase,
|
||||||
|
steps: (rec.steps || []).map((st: any) => `${st.ok ? '✓' : '✗'} ${st.name}: ${truncate(st.detail || '', 300)}`),
|
||||||
|
plan: rec.plan || null,
|
||||||
|
engine: 'tdc-connector',
|
||||||
|
operator: ctx.operatorKey,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
});
|
||||||
|
|
||||||
|
return success(this.name, artifacts, logs, started.map((x) => `${x.party}:${x.execId}`).join(','));
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
function sleep(ms: number): Promise<void> {
|
||||||
|
return new Promise((r) => setTimeout(r, ms));
|
||||||
|
}
|
||||||
|
|
||||||
|
function truncate(s: string, n: number): string {
|
||||||
|
return s.length > n ? `${s.slice(0, n)}…` : s;
|
||||||
|
}
|
||||||
@@ -6,6 +6,7 @@ import { Injectable } from '@nestjs/common';
|
|||||||
import { ComputeEngine } from './compute-engine';
|
import { ComputeEngine } from './compute-engine';
|
||||||
import { SimulationEngine } from './simulation-engine';
|
import { SimulationEngine } from './simulation-engine';
|
||||||
import { MpcEngine } from './mpc-engine';
|
import { MpcEngine } from './mpc-engine';
|
||||||
|
import { ConnectorEngine, connectorSettings } from './connector-engine';
|
||||||
import { BIN_SOURCE_LABEL, mpcSettings, probeCliSubcommands, probeMpc } from './mpc-client';
|
import { BIN_SOURCE_LABEL, mpcSettings, probeCliSubcommands, probeMpc } from './mpc-client';
|
||||||
import { applyRuntimeCapability, MPC_OPERATOR_MAP } from './mpc-operator-map';
|
import { applyRuntimeCapability, MPC_OPERATOR_MAP } from './mpc-operator-map';
|
||||||
|
|
||||||
@@ -16,8 +17,15 @@ export class EngineRegistry {
|
|||||||
|
|
||||||
constructor() {
|
constructor() {
|
||||||
const s = mpcSettings();
|
const s = mpcSettings();
|
||||||
this.driver = s.enabled ? 'mpc' : 'simulation';
|
// 优先级:tdc-connector(三方真编排,密态计算在设备侧) > ssw-mpc(本机 CLI) > 模拟。
|
||||||
this.engines = s.enabled ? [new MpcEngine(s), new SimulationEngine()] : [new SimulationEngine()];
|
// ★ 连接器是**最外层**形态:平台不持有 mpc 二进制,算子派发到各参与方的 tdc-connector。
|
||||||
|
const c = connectorSettings();
|
||||||
|
this.driver = c.enabled ? 'tdc-connector' : s.enabled ? 'mpc' : 'simulation';
|
||||||
|
this.engines = [
|
||||||
|
...(c.enabled ? [new ConnectorEngine(c)] : []),
|
||||||
|
...(s.enabled ? [new MpcEngine(s)] : []),
|
||||||
|
new SimulationEngine(),
|
||||||
|
];
|
||||||
}
|
}
|
||||||
|
|
||||||
select(engineType: string, operatorKey: string): ComputeEngine {
|
select(engineType: string, operatorKey: string): ComputeEngine {
|
||||||
@@ -27,6 +35,7 @@ export class EngineRegistry {
|
|||||||
/** 供 /Engine/Info 展示真实能力边界(不粉饰 TODO) */
|
/** 供 /Engine/Info 展示真实能力边界(不粉饰 TODO) */
|
||||||
async info() {
|
async info() {
|
||||||
const s = mpcSettings();
|
const s = mpcSettings();
|
||||||
|
const c = connectorSettings();
|
||||||
const probe = s.enabled ? await probeMpc(s) : null;
|
const probe = s.enabled ? await probeMpc(s) : null;
|
||||||
|
|
||||||
// ★ 能力表按**实测的子命令可用性**修正:版本二进制包不含 secure feature,
|
// ★ 能力表按**实测的子命令可用性**修正:版本二进制包不含 secure feature,
|
||||||
@@ -43,6 +52,18 @@ export class EngineRegistry {
|
|||||||
return {
|
return {
|
||||||
driver: this.driver,
|
driver: this.driver,
|
||||||
engines: this.engines.map((e) => e.name),
|
engines: this.engines.map((e) => e.name),
|
||||||
|
// ★ 连接器形态如实展示:端点、协议版本、命名空间。
|
||||||
|
// 多个端点配了几个方就写几个方,不隐藏「只配到 2 方」这种能力缺口。
|
||||||
|
connectors: {
|
||||||
|
enabled: c.enabled,
|
||||||
|
parties: c.targets.map((t) => t.party),
|
||||||
|
endpoints: c.targets.map((t) => `${t.party}=${t.base}`),
|
||||||
|
namespace: c.namespace,
|
||||||
|
protocolVersion: c.protocolVersion,
|
||||||
|
dispatchTimeoutMs: c.dispatchTimeoutMs,
|
||||||
|
tokenConfigured: !!c.token,
|
||||||
|
raw: c.raw || null,
|
||||||
|
},
|
||||||
mpc: {
|
mpc: {
|
||||||
repo: s.workDir,
|
repo: s.workDir,
|
||||||
bin: s.bin,
|
bin: s.bin,
|
||||||
|
|||||||
Reference in new issue
Block a user