# Ray 1.0.1 在 armv7 上实测记录 **结论先说:Ray 在 armv7 上是能跑的,而且我们跑通了完整节点。** 之前 `docs/RAY_CORE.md` §5 写的「Zynq 上不通」是错的,已改。 ## 1. 包从哪来 PyPI 上确实没有,但**社区编过**: | 来源 | 版本 | Python | 链接 | |---|---|---|---| | PidgeyBE | 1.0.1 | cp36 | `github.com/ray-project/ray/files/5703429/ray_armv7l_32bit.zip` | | PeterPirog | 1.2.0 | cp38 | `github.com/PeterPirog/Raspberry_armv7_builds/tree/main/ray` | 上游 issue:[ray-project/ray#12128](https://github.com/ray-project/ray/issues/12128)。 1.2.0 之后没人再编,官方 2.0.0.dev 在 armv7 上就失败了。 **唯一需要的源码改动是链接参数**(PeterPirog 在讨论区的原话): ``` # python/setup.py,给 bazel build 加一个 linkopt ["build", "--linkopt=-latomic", "--"] + bazel_targets ``` 原因是 32 位 ARM 上 `std::atomic` 会落成 `__atomic_load_8` / `__atomic_fetch_add_8`,libgcc 里没有内联版本,必须显式链 `libatomic`。 **这不是移植工程,是加一个编译/链接宏。** ## 2. 实物核对(2026-10-30 实测) `ray-1.0.1-cp36-cp36m-linux_armv7l.whl`:19 MB 压缩、64 MB 解压。 | 组件 | 大小 | 架构 | |---|---|---| | `_raylet.so` | 16.4 MB | ELF32 ARM,flags `0x5000400`(EABI5 + hard-float) | | `raylet` | 13.1 MB | 同上 | | `gcs_server` | 10.9 MB | 同上 | | `libray_redis_module.so` | 3.6 MB | 同上 | | `redis-server` | 3.4 MB | 同上 | | `plasma_store_server` | 0.8 MB | 同上 | C++ 侧合计约 **44.6 MB**(对照 x86_64 的 2.59:`_raylet.so` 44 MB + raylet 35 MB + gcs 40 MB)。 `_raylet.so` 的动态符号:10562 条,其中 `ray::` 命名空间 **2040** 个,且 `CoreWorkerProcess` 全套导出: ``` T _ZN3ray17CoreWorkerProcess10InitializeERKNS_17CoreWorkerOptionsE@@VERSION_1.0 T _ZN3ray17CoreWorkerProcess13GetCoreWorkerEv@@VERSION_1.0 T _ZN3ray17CoreWorkerProcess20RunTaskExecutionLoopEv@@VERSION_1.0 T _ZN3ray17CoreWorkerProcess8ShutdownEv@@VERSION_1.0 ``` 符号名里**没有 `B5cxx11`** —— 和 2.59 一样是旧 ABI(`_GLIBCXX_USE_CXX11_ABI=0`)。 也就是说 `ray/mpc_ray_shim.cc` 那套「绕开 bazel、直接链 `_raylet.so`」的做法 在 armv7 上同样成立,只是 API 要从 2.59 回退到 1.0.1。 ## 3. 完整节点跑通 环境:x86_64 沙箱 + `qemu-arm-static -L /usr/lib/arm-linux-gnueabihf` (qemu **只做用户态指令翻译**,不是模拟编译,跑的是真 ELF32 ARM 二进制)。 手工做掉 `ray start --head` 的 bootstrap(因为板上没有 python3.6), `ray/armv7/run_node.sh` 完整复现: 1. 主 redis `:6390` + 分片 redis `:6391`,都 `--loadmodule libray_redis_module.so` 2. 播种 5 个键(等同 `services.py::start_redis`): `NumRedisShards=1`、`RedirectOutput=0`、`JobCounter=0`、`ray_version`、`RedisShards` 3. `gcs_server :6392` 4. `plasma_store_server`(注意容器 `/dev/shm` 只有 64 MB,要 `-d /tmp/plasmadir -m 50M`) 5. `raylet --node_manager_port=6393` 实测输出: ``` Module 'ray' loaded from .../libray_redis_module.so GcsServer server started, listening on port 6392 Gcs server address = 127.0.0.1:6392 ObjectManager server started, listening on port 34591 node_manager.cc:178] Initializing NodeManager with ID ebb89cb915e55e838bcadeb10b7bcb16b9cfb643 NodeManager server started, listening on port 6393 service_based_accessor.cc:775] Received notification for node id = ebb89cb9…, IsAlive = 1 raylet 存活 ✅ ``` `IsAlive = 1` 是 GCS 收到 raylet 注册后的确认。整条链 **redis(带 ray 模块)→ gcs_server → plasma → raylet** 在 armv7 上都成立。 ### 两个不是 32 位问题的坑 | 现象 | 真因 | 处理 | |---|---|---| | `Check failed: No entry found for NumRedisShards` | redis 没被 bootstrap 播种 | 手工写 5 个键 | | `System memory request exceeds memory available in /dev/shm` | 容器 `/dev/shm` 只有 64 MB | `-d /tmp/plasmadir -m 50M` | | `At least one of Python/Java/CPP worker command should be provided` | raylet 硬性校验 | `--num_initial_workers=0` 时给 `--cpp_worker_command=/bin/true` | ## 4. 但这条路对 mpc 的代价(必须说清) 能跑 ≠ 该用。三个真实代价: 1. **版本断层**。1.0.1 是 2020-12 的代码,GCS 协议和 2.59 不同,**接不进现代 Ray 集群**。 要么整集群降级到 1.x,要么边缘独立成一个小集群。 2. **要 python3.6**。wheel 是 cp36,`_raylet.so` 是 CPython 扩展(和 2.59 同样有几百个 `Py*` 未定义符号)。板上跑得装 python3.6,或者像 `crates/mpc-ray/build.rs` 那样链 libpython 兜住符号——但 Debian 12 / PetaLinux 都不带 3.6。 3. **44.6 MB 二进制 + plasma 内存**。ACZ7015 是 1 GB DDR3,放得下;512 MB 的板子就悬。 ## 5. 三个选项的取舍 | 方案 | 工作量 | 能得到 | 风险 | |---|---|---|---| | **A. 用 1.0.1 armv7 + 移植 shim** | 中(改 ~250 行 shim 到 1.0 API,交叉编译 shim) | 边缘板上真的跑 Ray,能加入 1.x 集群 | 2020 年代码;要 python3.6 | | **B. 自己编 2.59 armv7** | 大(bazel crosstool + 38 依赖全过一遍 + 未知 32 位问题) | 与现代 Ray 协议一致 | 未知量大,可能卡死在某个依赖 | | **C. 保持 mpc-orch** | 零(已完成,661 行) | 放置 + 成员,任意架构 | 没有 Ray 生态 | **当前选择:C 作为默认,A 作为「确实需要 Ray 生态」时的备选。** B 不建议——为一个我们只用「放置」的能力去背 38 个依赖的 32 位交叉编译。 ## 6. 跨版本兼容性实测:1.0.1 ⟷ 2.59 双向都不通 结论:**不兼容,且不是「协商失败」,是传输层就不是一个协议。** ### 1.0.1 节点想加入 2.59 集群 ``` $ redis-cli -h 169.254.68.6 -p 6379 ping Error: Protocol error, got "\x00" as reply type byte $ # 1.0.1 armv7 raylet --redis_address=<2.59 head> --redis_port=6379 F redis_client.cc:114] Check failed: _s.ok() Bad status: RedisError: Protocol error, got "\x00" as reply type byte ``` 原因:Ray 2.0 把 Redis 从 GCS 后端彻底移除,head 的 6379 从 RESP 换成了 gRPC(HTTP/2)。 1.0.1 的 raylet 一上来就发 RESP 的 `PING`,收到的第一个字节是 HTTP/2 的 `\x00`。 ### 2.59 节点想加入 1.0.1 集群 ``` $ ray start --address=127.0.0.1:6402 # 1.0.1 的 gcs_server RuntimeError: Failed to connect to GCS. Last connection error: ray.exceptions.RpcError: RPC error: ``` gRPC 这一层通了,但 GCS 的 service/protobuf 定义在 1.x → 2.x 之间已经改过, 握手拿不到可用的服务。 ### 所以 跨版本混部**没有中间路线**。要么整集群 2.x(那么 armv7 节点进不来, 因为 2.59 没有 armv7 构建),要么整集群 1.0.1(那么 armv7 节点能进来, 但要接受 2020 年的代码)。这就是「对成」的意思——把两端都放在 1.0.1 上。 ## 7. 混合架构集群实测:x86_64 原生 + armv7,同为 1.0.1 `ray/armv7/mixed_cluster.sh`:x86_64 用 1.0.1 的 `manylinux1_x86_64` wheel 里的 `redis-server` / `gcs_server` / `raylet` / `plasma_store_server` 原生跑; armv7 那一侧用 qemu-arm 跑同版本的二进制。两端同源同版本,只差指令集。 实测: ``` === 4) raylet x86_64(cpu=4) I node_manager.cc:178] Initializing NodeManager with ID f85f933f3a48916f22e2e5b32636793c58faee04 I grpc_server.cc:74] NodeManager server started, listening on port 6403. === 5) raylet armv7(cpu=2,qemu) I node_manager.cc:178] Initializing NodeManager with ID 9f3e5ae101ab5da23e975b27f8f09d0c9ca00f72 I grpc_server.cc:74] NodeManager server started, listening on port 6413. --- 存活 raylet x86 ✅ raylet armv7 ✅ ``` **互相看得见**(两侧日志里的节点通知是同一对 ID): x86 raylet 看到: ``` 9f3e5ae101ab5da23e975b27f8f09d0c9ca00f72, IsAlive = 1 f85f933f3a48916f22e2e5b32636793c58faee04, IsAlive = 1 ``` armv7 raylet 看到: ``` 9f3e5ae101ab5da23e975b27f8f09d0c9ca00f72, IsAlive = 1 f85f933f3a48916f22e2e5b32636793c58faee04, IsAlive = 1 I node_manager.cc:949] [HeartbeatAdded]: received heartbeat from unknown client id f85f933f3a48… ``` GCS 表里正好 4 条(2 个节点 × `NODE_RESOURCE` + `CLIENT`), `ray/armv7/decode_gcs.py` 直接读 redis 分片解码: ``` shard 键总数: 4 NODE_RESOURCE node=9f3e5ae101ab5da23e975b27… value=49B → 1000000000 | 127.0.0.1 NODE_RESOURCE node=f85f933f3a48916f22e2e5b3… value=49B → 1000000000 | 127.0.0.1 CLIENT node=9f3e5ae101ab5da23e975b27… value=93B → /tmp/raylet_a.sock | /tmp/plasma_a.sock CLIENT node=f85f933f3a48916f22e2e5b3… value=93B → /tmp/raylet_x.sock | /tmp/plasma_x.sock ``` CLIENT 条目里的 socket 路径一个 `_a`(armv7)一个 `_x`(x86),是两条独立的注册记录, 不是同一条被覆盖。 **这一步的意义**:armv7 节点不是「能启动」,而是真的作为一个成员挂在集群里, 和 x86 节点交换心跳、被 GCS 记账。跨指令集组集群这件事在 Ray 1.0.1 上是通的。 ## 8. 复现 ```bash # 拿包(GitHub 直连,注意 zip 可能被代理截断,用 -C - 续传) curl -sSL --http1.1 -C - -o ray_armv7.zip \ https://github.com/ray-project/ray/files/5703429/ray_armv7l_32bit.zip # 环境:Debian 12 x86_64 容器 apt-get install -y qemu-user-static redis-tools dpkg --add-architecture armhf echo 'deb [arch=armhf] http://mirrors.ustc.edu.cn/debian bookworm main' >> /etc/apt/sources.list apt-get update && apt-get install -y libc6:armhf libstdc++6:armhf libgcc-s1:armhf # 解包 + 起节点 python3 -c "import zipfile;zipfile.ZipFile('ray_armv7.zip').extractall('.')" python3 -c "import zipfile,glob;zipfile.ZipFile(glob.glob('*.whl')[0]).extractall('/tmp/r17')" bash ray/armv7/run_node.sh # armv7 单节点(redis+gcs+plasma+raylet) bash ray/armv7/run_gcs_only.sh # 只起 armv7 控制面 bash ray/armv7/compat_probe.sh # 探测 1.0.1 ⟷ 2.59 不兼容 bash ray/armv7/mixed_cluster.sh # x86_64 原生 + armv7 混合集群(同为 1.0.1) python3 ray/armv7/decode_gcs.py # 解码 GCS 节点表(需集群在跑) ```